
Add to Cart
Output Rating 7KW
Cable Length 16 feet
Protection Degrees IP55
Noise ≤40dB
Size:
Temperature protection
Easy maintenance
Efficient charging
2 years warranty
Protection level IP55
APP control
Over voltage protection
Under voltage protection
Over load protection
Short circuit protection
Earth leakage protection
Over-temperature protection
Lighting protection
Reference paper indicating the position of screw&hole size on the wall
Drill the holes through reference paper
Hammer the M5*60mm plastic bolts into the holes
Take down the reference paper from the wall
Align the hanger with the pre-drilled mounting holes, and use a cross screwdriver to tighten the 4 screws(M5*60mm) for the hanger to complete the hanger installation
Place the charger onto the plate on the wall
This picture refers to a complete installation and you can install it everywhere you like
Remove the protective film of the cover
Make sure the wall-box is connected to power
Connect the EV and the wall-box with the EV charging cable
Set the charging parameters on the phone and then click to start charging
The vehicle is being charged normally
Click the button in the APP to stop charging
Unplug the device and warp the cable around the hook